14. Docker Datacenter¶
This chapter documents a walk thru for running a development instance of Docker Universal Control Plane, part of Docker Datacenter.
Watch a UCP demo.
14.1. Datacenter Walk-thru¶
The following output walks thru these items:
- starting 3 VMs with Docker Machine
- installing UCP on one node as a controller; joining 2 other nodes
- setting up container networking on each node
- creating one overlay network
- starting a Consul container on each node
####################################
# DESTROY PREV DOCKER-MACHINE VMS: #
# 1. STOP NODES #
# 2. REMOVE NODES #
# 3. REMOVE VIRTUALBOX HOST-ONLY- #
# INTERFACE #
####################################
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine ls
NAME ACTIVE DRIVER STATE URL SWARM DOCKER ERRORS
node1 - virtualbox Running tcp://192.168.99.100:2376 v1.10.2
node2 - virtualbox Running tcp://192.168.99.101:2376 v1.10.2
node3 - virtualbox Running tcp://192.168.99.102:2376 v1.10.2
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine stop node1
Stopping "node1"...
Machine "node1" was stopped.
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine stop node2
Stopping "node2"...
Machine "node2" was stopped.
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine stop node3
Stopping "node3"...
Machine "node3" was stopped.
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine rm node1
About to remove node1
Are you sure? (y/n): y
Successfully removed node1
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine rm node2
About to remove node2
Are you sure? (y/n): y
Successfully removed node2
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine rm node3
About to remove node3
Are you sure? (y/n): y
Successfully removed node3
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine ls
NAME ACTIVE DRIVER STATE URL SWARM DOCKER ERRORS
[dimsenv] mboggess@dimsdev2:~ () $ vboxmanage list hostonlyifs
Name: vboxnet0
GUID: 786f6276-656e-4074-8000-0a0027000000
DHCP: Disabled
IPAddress: 192.168.99.1
NetworkMask: 255.255.255.0
IPV6Address: fe80:0000:0000:0000:0800:27ff:fe00:0000
IPV6NetworkMaskPrefixLength: 64
HardwareAddress: 0a:00:27:00:00:00
MediumType: Ethernet
Status: Up
VBoxNetworkName: HostInterfaceNetworking-vboxnet0
[dimsenv] mboggess@dimsdev2:~ () $ vboxmanage hostonlyif
Usage:
VBoxManage hostonlyif ipconfig <name>
[--dhcp |
--ip<ipv4> [--netmask<ipv4> (def: 255.255.255.0)] |
--ipv6<ipv6> [--netmasklengthv6<length> (def: 64)]]
create |
remove <name>
[dimsenv] mboggess@dimsdev2:~ () $ vboxmanage hostonlyif remove vboxnet0
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
[dimsenv] mboggess@dimsdev2:~ () $ vboxmanage list hostonlyifs
#################################
# START NEW DOCKER MACHINE VMS: #
#################################
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine create -d virtualbox \
> --virtualbox-memory "2000" \
> --virtualbox-disk-size "5000" node0
Running pre-create checks...
(node0) You are using version 4.3.28r100309 of VirtualBox. If you encounter issues, you might want to upgrade to version 5 at https://www.virtualbox.org
Creating machine...
(node0) Copying /home/mboggess/.docker/machine/cache/boot2docker.iso to /home/mboggess/.docker/machine/machines/node0/boot2docker.iso...
(node0) Creating VirtualBox VM...
(node0) Creating SSH key...
(node0) Starting the VM...
(node0) Check network to re-create if needed...
(node0) Found a new host-only adapter: "vboxnet0"
(node0) Waiting for an IP...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with boot2docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Checking connection to Docker...
Docker is up and running!
To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env node0
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine create -d virtualbox \
> --virtualbox-memory "2000" node1
Running pre-create checks...
(node1) You are using version 4.3.28r100309 of VirtualBox. If you encounter issues, you might want to upgrade to version 5 at https://www.virtualbox.org
Creating machine...
(node1) Copying /home/mboggess/.docker/machine/cache/boot2docker.iso to /home/mboggess/.docker/machine/machines/node1/boot2docker.iso...
(node1) Creating VirtualBox VM...
(node1) Creating SSH key...
(node1) Starting the VM...
(node1) Check network to re-create if needed...
(node1) Waiting for an IP...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with boot2docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Checking connection to Docker...
Docker is up and running!
To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env node1
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine create -d virtualbox --virtualbox-memory "2000" node2
Running pre-create checks...
(node2) You are using version 4.3.28r100309 of VirtualBox. If you encounter issues, you might want to upgrade to version 5 at https://www.virtualbox.org
Creating machine...
(node2) Copying /home/mboggess/.docker/machine/cache/boot2docker.iso to /home/mboggess/.docker/machine/machines/node2/boot2docker.iso...
(node2) Creating VirtualBox VM...
(node2) Creating SSH key...
(node2) Starting the VM...
(node2) Check network to re-create if needed...
(node2) Waiting for an IP...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with boot2docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Checking connection to Docker...
Docker is up and running!
To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env node2
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine ls
NAME ACTIVE DRIVER STATE URL SWARM DOCKER ERRORS
node0 - virtualbox Running tcp://192.168.99.100:2376 v1.10.2
node1 - virtualbox Running tcp://192.168.99.101:2376 v1.10.2
node2 - virtualbox Running tcp://192.168.99.102:2376 v1.10.2
##############################
# INSTALL UCP ON CONTROLLER: #
##############################
# The following command is important.
# It sets up the shell environment to interact
# with the Docker engine on that node.
[dimsenv] mboggess@dimsdev2:~ () $ eval $(docker-machine env node0)
[dimsenv] mboggess@dimsdev2:~ () $ docker run --rm -it \
> -v /var/run/docker.sock:/var/run/docker.sock \
> --name ucp docker/ucp install -i \
> --swarm-port 3376 --host-address $(docker-machine ip node0)
Unable to find image 'docker/ucp:latest' locally
latest: Pulling from docker/ucp
9ba637b863b8: Pull complete
a3ed95caeb02: Pull complete
Digest: sha256:1016db92f68ef6f9b58053e10eec8465efc7344a3f1e4cbb8fc3e446c42e89d4
Status: Downloaded newer image for docker/ucp:latest
INFO[0000] Verifying your system is compatible with UCP
# Remember your password. The username is "admin".
Please choose your initial Orca admin password:
Confirm your initial password:
INFO[0016] Pulling required images... (this may take a while)
WARN[0044] None of the hostnames we'll be using in the UCP certificates [node0 127.0.0.1 172.17.0.1 192.168.99.100] contain a domain component. Your generated certs may fail TLS validation unless you only use one of these shortnames or IPs to connect. You can use the --san flag to add more aliases
You may enter additional aliases (SANs) now or press enter to proceed with the above list.
Additional aliases:
INFO[0047] Installing UCP with host address 192.168.99.100 - If this is incorrect, please specify an alternative address with the '--host-address' flag
INFO[0000] Generating UCP Cluster Root CA
INFO[0018] Generating UCP Client Root CA
INFO[0021] Deploying UCP Containers
INFO[0026] UCP instance ID: 3RSF:3X4K:YW6L:I6E2:XFT3:3INP:JHBF:AFEB:PUXE:FNDU:SELW:43GE
INFO[0026] UCP Server SSL: SHA1 Fingerprint=13:C0:19:5A:98:92:34:18:9A:CB:3E:4F:EB:A3:0E:D6:E3:8E:4E:C6
INFO[0026] Login as "admin"/(your admin password) to UCP at https://192.168.99.100:443
#######################################
# JOIN OTHER NODES TO UCP CONTROLLER: #
#######################################
# Make sure to run the eval command for each node
# before the docker run command!
[dimsenv] mboggess@dimsdev2:~ () $ eval $(docker-machine env node1)
[dimsenv] mboggess@dimsdev2:~ () $ docker run --rm -it -v /var/run/docker.sock:/var/run/docker.sock --name ucp docker/ucp join -i --host-address $(docker-machine ip node1)
Please enter the URL to your UCP server: https://192.168.99.100
UCP server https://192.168.99.100
Subject: ucp
Issuer: UCP Client Root CA
SHA1 Fingerprint=13:C0:19:5A:98:92:34:18:9A:CB:3E:4F:EB:A3:0E:D6:E3:8E:4E:C6
Do you want to trust this server and proceed with the join? (y/n): y
Please enter your UCP Admin username: admin
Please enter your UCP Admin password:
INFO[0017] Pulling required images... (this may take a while)
WARN[0048] None of the hostnames we'll be using in the UCP certificates [node1 127.0.0.1 172.17.0.1 192.168.99.101] contain a domain component. Your generated certs may fail TLS validation unless you only use one of these shortnames or IPs to connect. You can use the --san flag to add more aliases
You may enter additional aliases (SANs) now or press enter to proceed with the above list.
Additional aliases:
INFO[0000] This engine will join UCP and advertise itself with host address 192.168.99.101 - If this is incorrect, please specify an alternative address with the '--host-address' flag
INFO[0000] Verifying your system is compatible with UCP
INFO[0006] Starting local swarm containers
[dimsenv] mboggess@dimsdev2:~ () $ eval $(docker-machine env node2)
[dimsenv] mboggess@dimsdev2:~ () $ docker run --rm -it -v /var/run/docker.sock:/var/run/docker.sock --name ucp docker/ucp join -i --host-address $(docker-machine ip node2)
Please enter the URL to your UCP server: https://192.168.99.100
UCP server https://192.168.99.100
Subject: ucp
Issuer: UCP Client Root CA
SHA1 Fingerprint=13:C0:19:5A:98:92:34:18:9A:CB:3E:4F:EB:A3:0E:D6:E3:8E:4E:C6
Do you want to trust this server and proceed with the join? (y/n): y
Please enter your UCP Admin username: admin
Please enter your UCP Admin password:
INFO[0013] Pulling required images... (this may take a while)
WARN[0043] None of the hostnames we'll be using in the UCP certificates [node2 127.0.0.1 172.17.0.1 192.168.99.102] contain a domain component. Your generated certs may fail TLS validation unless you only use one of these shortnames or IPs to connect. You can use the --san flag to add more aliases
You may enter additional aliases (SANs) now or press enter to proceed with the above list.
Additional aliases:
INFO[0000] This engine will join UCP and advertise itself with host address 192.168.99.102 - If this is incorrect, please specify an alternative address with the '--host-address' flag
INFO[0000] Verifying your system is compatible with UCP
INFO[0003] Starting local swarm containers
###############################
# SETUP CONTAINER NETWORKING: #
###############################
[dimsenv] mboggess@dimsdev2:~ () $ eval $(docker-machine env node0)
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine ssh node0
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
_ _ ____ _ _
| |__ ___ ___ | |_|___ \ __| | ___ ___| | _____ _ __
| '_ \ / _ \ / _ \| __| __) / _` |/ _ \ / __| |/ / _ \ '__|
| |_) | (_) | (_) | |_ / __/ (_| | (_) | (__| < __/ |
|_.__/ \___/ \___/ \__|_____\__,_|\___/ \___|_|\_\___|_|
Boot2Docker version 1.10.2, build master : 611be10 - Mon Feb 22 22:47:06 UTC 2016
Docker version 1.10.2, build c3959b1
# Run the engine-discovery command using the
# --update flag to force the update
docker@node0:~$ docker run --rm -it --name ucp \
> -v /var/run/docker.sock:/var/run/docker.sock \
> docker/ucp engine-discovery \
> --controller 192.168.99.100 \
> --host-address 192.168.99.100 --update
INFO[0000] This cluster does not have high availability because you only have a single controller.
INFO[0000] If you plan to add additional replica nodes for HA, you should do this before running this tool to reduce downtime.
WARN[0002] Configuration updated. You will have to manually restart the docker daemon for the changes to take effect.
# Restart docker. Since this is a boot2docker node,
# it's via init.d rather than the service command.
docker@node0:~$ sudo /etc/init.d/docker restart
Need TLS certs for node0,127.0.0.1,10.0.2.15,192.168.99.100
-------------------
# Check to see if docker is running.
# If this is the first or second nodes, the etcd cluster
# will complain because it hasn't achieved a quorum yet.
docker@node0:~$ sudo tail -f /var/log/docker.log
time="2016-03-07T22:11:44.070183580Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A POSTROUTING -p tcp -s 172.17.0.6 -d 172.17.0.6 --dport 12382 -j MASQUERADE]"
time="2016-03-07T22:11:44.093786359Z" level=debug msg="Assigning addresses for endpoint ucp-client-root-ca's interface on network bridge"
time="2016-03-07T22:11:44.094136165Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A DOCKER -p tcp -d 0/0 --dport 12376 -j DNAT --to-destination 172.17.0.4:2376 ! -i docker0]"
time="2016-03-07T22:11:44.097042994Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -A DOCKER ! -i docker0 -o docker0 -p tcp -d 172.17.0.4 --dport 2376 -j ACCEPT]"
time="2016-03-07T22:11:44.097919349Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A POSTROUTING -p tcp -s 172.17.0.4 -d 172.17.0.4 --dport 2376 -j MASQUERADE]"
time="2016-03-07T22:11:44.120796586Z" level=debug msg="Assigning addresses for endpoint ucp-proxy's interface on network bridge"
time="2016-03-07T22:11:47.002871426Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:11:50.003202887Z" level=debug msg="could not find endpoint b605cdd78addde5cfde07aa525d67ce9855fc106b8477a6effdf1cc22a185254 in global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:11:53.005044110Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:11:55.240581226Z" level=debug msg="could not find endpoint 8e2956581574300e02f4efb367eb88e042f82a80985ed50f282f79d0529b0e23 in global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:11:58.240348551Z" level=debug msg="failed to get endpoints for network bridge scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:01.240514251Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:04.240443463Z" level=error msg="discovery error: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:04.240519734Z" level=warning msg="Registering as \"192.168.99.100:12376\" in discovery failed: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:04.240552300Z" level=debug msg="could not find endpoint 87e7556fe7ffe84c25abe1a0838f51ef54389eb6c87468f8431eec495fcf4c5c in global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:07.240511596Z" level=debug msg="failed to get endpoints for network bridge scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:07.241604653Z" level=error msg="discovery error: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:10.240455936Z" level=error msg="discovery error: Unexpected watch error"
time="2016-03-07T22:12:10.240512021Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:13.240302992Z" level=debug msg="could not find endpoint 95bb73a58f52adcf1ca98ba9a1298eb6447684b5716a59c4b43481b13795bcc2 in global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:16.240504890Z" level=debug msg="failed to get endpoints for network bridge scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:19.240514865Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:19.240580469Z" level=debug msg="Assigning addresses for endpoint ucp-cluster-root-ca's interface on network bridge"
time="2016-03-07T22:12:19.240598629Z" level=debug msg="RequestAddress(LocalDefault/172.17.0.0/16, <nil>, map[])"
time="2016-03-07T22:12:19.243498664Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A DOCKER -p tcp -d 0/0 --dport 12381 -j DNAT --to-destination 172.17.0.8:12381 ! -i docker0]"
time="2016-03-07T22:12:19.246101114Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -A DOCKER ! -i docker0 -o docker0 -p tcp -d 172.17.0.8 --dport 12381 -j ACCEPT]"
time="2016-03-07T22:12:19.248576494Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A POSTROUTING -p tcp -s 172.17.0.8 -d 172.17.0.8 --dport 12381 -j MASQUERADE]"
time="2016-03-07T22:12:19.276450231Z" level=debug msg="Assigning addresses for endpoint ucp-cluster-root-ca's interface on network bridge"
time="2016-03-07T22:12:22.240591811Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:25.240425959Z" level=warning msg="Registering as \"192.168.99.100:12376\" in discovery failed: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:25.240490015Z" level=debug msg="could not find endpoint b605cdd78addde5cfde07aa525d67ce9855fc106b8477a6effdf1cc22a185254 in global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:28.240338660Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:31.240448754Z" level=error msg="discovery error: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:12:31.240505330Z" level=debug msg="could not find network 1faf51793e49dbfb42520d09598c45431e0a4791ca280866d2d451965ef88b05: client: etcd cluster is unavailable or misconfigured"
^C
docker@node0:~$ exit
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine ssh node1
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
_ _ ____ _ _
| |__ ___ ___ | |_|___ \ __| | ___ ___| | _____ _ __
| '_ \ / _ \ / _ \| __| __) / _` |/ _ \ / __| |/ / _ \ '__|
| |_) | (_) | (_) | |_ / __/ (_| | (_) | (__| < __/ |
|_.__/ \___/ \___/ \__|_____\__,_|\___/ \___|_|\_\___|_|
Boot2Docker version 1.10.2, build master : 611be10 - Mon Feb 22 22:47:06 UTC 2016
Docker version 1.10.2, build c3959b1
# Run the engine-discovery command using the
# --update flag to force the update
docker@node1:~$ docker run --rm -it --name ucp \
> -v /var/run/docker.sock:/var/run/docker.sock \
> docker/ucp engine-discovery \
> --controller 192.168.99.100 \
> --host-address 192.168.99.101 --update
INFO[0000] This cluster does not have high availability because you only have a single controller.
INFO[0000] If you plan to add additional replica nodes for HA, you should do this before running this tool to reduce downtime.
WARN[0002] Configuration updated. You will have to manually restart the docker daemon for the changes to take effect.
# Restart docker. Since this is a boot2docker node,
# it's via init.d rather than the service command.
docker@node1:~$ sudo /etc/init.d/docker restart
Need TLS certs for node1,127.0.0.1,10.0.2.15,192.168.99.101
-------------------
# Check to see if docker is running.
# If this is the first or second nodes, the etcd cluster
# will complain because it hasn't achieved a quorum yet.
docker@node1:~$ sudo tail -f /var/log/docker.log
time="2016-03-07T22:13:46.271986099Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -n -L DOCKER]"
time="2016-03-07T22:13:46.272800845Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -N DOCKER]"
time="2016-03-07T22:13:46.273586600Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -n -L DOCKER]"
time="2016-03-07T22:13:46.274353619Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -n -L DOCKER-ISOLATION]"
time="2016-03-07T22:13:46.275113441Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -C DOCKER-ISOLATION -j RETURN]"
time="2016-03-07T22:13:46.276694579Z" level=debug msg="/usr/local/sbin/iptables, [--wait -I DOCKER-ISOLATION -j RETURN]"
time="2016-03-07T22:13:49.257937305Z" level=debug msg="Registering ipam driver: \"default\""
time="2016-03-07T22:13:49.258517657Z" level=error msg="discovery error: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:13:52.258733627Z" level=error msg="discovery error: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:13:52.259818156Z" level=debug msg="failed to get endpoints for network bridge scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:13:55.257366820Z" level=debug msg="failed to get networks for scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:13:55.257706784Z" level=error msg="discovery error: Unexpected watch error"
time="2016-03-07T22:13:55.258525392Z" level=debug msg="releasing IPv4 pools from network bridge (1000394495e2c6bd577004f17a75ed038c7f1696448275552fd1d7219e38f02e)"
time="2016-03-07T22:13:55.258554539Z" level=debug msg="ReleaseAddress(LocalDefault/172.17.0.0/16, 172.17.0.1)"
time="2016-03-07T22:13:55.258957934Z" level=debug msg="ReleasePool(LocalDefault/172.17.0.0/16)"
time="2016-03-07T22:13:55.260916658Z" level=info msg="Default bridge (docker0) is assigned with an IP address 172.17.0.0/16. Daemon option --bip can be used to set a preferred IP address"
time="2016-03-07T22:13:55.260932331Z" level=debug msg="Allocating IPv4 pools for network bridge (b88f0323c65d45add2d7b24c36a9206d006b420c6030273192d24721948d0e02)"
time="2016-03-07T22:13:55.260946821Z" level=debug msg="RequestPool(LocalDefault, 172.17.0.0/16, , map[], false)"
time="2016-03-07T22:13:55.263397489Z" level=debug msg="RequestAddress(LocalDefault/172.17.0.0/16, 172.17.0.1, map[RequestAddressType:com.docker.network.gateway])"
time="2016-03-07T22:13:55.263939490Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -C POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE]"
time="2016-03-07T22:13:55.265768161Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -C DOCKER -i docker0 -j RETURN]"
time="2016-03-07T22:13:55.269104645Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -I DOCKER -i docker0 -j RETURN]"
time="2016-03-07T22:13:55.279625706Z" level=debug msg="/usr/local/sbin/iptables, [--wait -D FORWARD -i docker0 -o docker0 -j DROP]"
time="2016-03-07T22:13:55.281677039Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -C FORWARD -i docker0 -o docker0 -j ACCEPT]"
time="2016-03-07T22:13:55.283548456Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -C FORWARD -i docker0 ! -o docker0 -j ACCEPT]"
time="2016-03-07T22:13:55.285372426Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -C FORWARD -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT]"
time="2016-03-07T22:13:55.286692461Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -C PREROUTING -m addrtype --dst-type LOCAL -j DOCKER]"
time="2016-03-07T22:13:55.288968983Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER]"
time="2016-03-07T22:13:55.292775137Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -C OUTPUT -m addrtype --dst-type LOCAL -j DOCKER ! --dst 127.0.0.0/8]"
time="2016-03-07T22:13:55.295829670Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A OUTPUT -m addrtype --dst-type LOCAL -j DOCKER ! --dst 127.0.0.0/8]"
time="2016-03-07T22:13:55.297141841Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -C FORWARD -o docker0 -j DOCKER]"
time="2016-03-07T22:13:55.298264112Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -C FORWARD -o docker0 -j DOCKER]"
time="2016-03-07T22:13:55.299305220Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -C FORWARD -j DOCKER-ISOLATION]"
time="2016-03-07T22:13:55.301557053Z" level=debug msg="/usr/local/sbin/iptables, [--wait -D FORWARD -j DOCKER-ISOLATION]"
time="2016-03-07T22:13:55.302973335Z" level=debug msg="/usr/local/sbin/iptables, [--wait -I FORWARD -j DOCKER-ISOLATION]"
time="2016-03-07T22:13:55.306115140Z" level=warning msg="Your kernel does not support cgroup blkio weight"
time="2016-03-07T22:13:55.306137240Z" level=warning msg="Your kernel does not support cgroup blkio weight_device"
time="2016-03-07T22:13:55.306368634Z" level=debug msg="Cleaning up old shm/mqueue mounts: start."
time="2016-03-07T22:13:55.306436591Z" level=debug msg="Cleaning up old shm/mqueue mounts: done."
time="2016-03-07T22:13:55.306847988Z" level=debug msg="Loaded container 21d865de28e79c10a80125d1fb13d72f3e6b3d44accf8264b3e285d3b5ddbe2d"
time="2016-03-07T22:13:55.307060932Z" level=debug msg="Loaded container d5d7a3b2009769571f35029711c2564b7ee6231cbadfa858c9bad471a933f676"
time="2016-03-07T22:13:55.307357391Z" level=debug msg="Starting container d5d7a3b2009769571f35029711c2564b7ee6231cbadfa858c9bad471a933f676"
time="2016-03-07T22:13:55.309267051Z" level=debug msg="Starting container 21d865de28e79c10a80125d1fb13d72f3e6b3d44accf8264b3e285d3b5ddbe2d"
time="2016-03-07T22:13:55.310005643Z" level=debug msg="container mounted via layerStore: /mnt/sda1/var/lib/docker/aufs/mnt/b8c1dc4410caf9f4fab300b45a9f0fbff089d70294540060f76f1f2f9f572ac1"
time="2016-03-07T22:13:55.310584317Z" level=debug msg="container mounted via layerStore: /mnt/sda1/var/lib/docker/aufs/mnt/129e034a6b4e86ec6f8f294a1d900575fd811ac461509a392543bcf63a81e269"
time="2016-03-07T22:13:58.257050034Z" level=debug msg="failed to get networks for scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:14:01.256474377Z" level=debug msg="failed to get networks for scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:14:04.256797930Z" level=debug msg="failed to get endpoints for network bridge scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:14:04.257003090Z" level=debug msg="Assigning addresses for endpoint ucp-proxy's interface on network bridge"
time="2016-03-07T22:14:04.257028352Z" level=debug msg="RequestAddress(LocalDefault/172.17.0.0/16, <nil>, map[])"
time="2016-03-07T22:14:04.259816002Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A DOCKER -p tcp -d 0/0 --dport 12376 -j DNAT --to-destination 172.17.0.2:2376 ! -i docker0]"
time="2016-03-07T22:14:04.263040050Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t filter -A DOCKER ! -i docker0 -o docker0 -p tcp -d 172.17.0.2 --dport 2376 -j ACCEPT]"
time="2016-03-07T22:14:04.265142604Z" level=debug msg="/usr/local/sbin/iptables, [--wait -t nat -A POSTROUTING -p tcp -s 172.17.0.2 -d 172.17.0.2 --dport 2376 -j MASQUERADE]"
time="2016-03-07T22:14:04.292801112Z" level=debug msg="Assigning addresses for endpoint ucp-proxy's interface on network bridge"
time="2016-03-07T22:14:07.256722098Z" level=debug msg="failed to get endpoints for network bridge scope global: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:14:07.256809339Z" level=debug msg="Assigning addresses for endpoint ucp-swarm-join's interface on network bridge"
time="2016-03-07T22:14:07.256832041Z" level=debug msg="RequestAddress(LocalDefault/172.17.0.0/16, <nil>, map[])"
time="2016-03-07T22:14:07.259553952Z" level=debug msg="Assigning addresses for endpoint ucp-swarm-join's interface on network bridge"
time="2016-03-07T22:14:08.636576527Z" level=warning msg="Registering as \"192.168.99.101:12376\" in discovery failed: client: etcd cluster is unavailable or misconfigured"
time="2016-03-07T22:14:08.845887701Z" level=info msg="Daemon has completed initialization"
time="2016-03-07T22:14:08.845913783Z" level=info msg="Docker daemon" commit=c3959b1 execdriver=native-0.2 graphdriver=aufs version=1.10.2
time="2016-03-07T22:14:08.846256409Z" level=debug msg="Registering routers"
time="2016-03-07T22:14:08.846270306Z" level=debug msg="Registering HEAD, /containers/{name:.*}/archive"
time="2016-03-07T22:14:08.847061019Z" level=debug msg="Registering GET, /containers/json"
time="2016-03-07T22:14:08.847153618Z" level=debug msg="Registering GET, /containers/{name:.*}/export"
time="2016-03-07T22:14:08.847238114Z" level=debug msg="Registering GET, /containers/{name:.*}/changes"
time="2016-03-07T22:14:08.847326718Z" level=debug msg="Registering GET, /containers/{name:.*}/json"
time="2016-03-07T22:14:08.847399636Z" level=debug msg="Registering GET, /containers/{name:.*}/top"
time="2016-03-07T22:14:08.847474180Z" level=debug msg="Registering GET, /containers/{name:.*}/logs"
time="2016-03-07T22:14:08.847546361Z" level=debug msg="Registering GET, /containers/{name:.*}/stats"
time="2016-03-07T22:14:08.847617874Z" level=debug msg="Registering GET, /containers/{name:.*}/attach/ws"
time="2016-03-07T22:14:08.847760982Z" level=debug msg="Registering GET, /exec/{id:.*}/json"
time="2016-03-07T22:14:08.847832158Z" level=debug msg="Registering GET, /containers/{name:.*}/archive"
time="2016-03-07T22:14:08.847912683Z" level=debug msg="Registering POST, /containers/create"
time="2016-03-07T22:14:08.847974072Z" level=debug msg="Registering POST, /containers/{name:.*}/kill"
time="2016-03-07T22:14:08.848047654Z" level=debug msg="Registering POST, /containers/{name:.*}/pause"
time="2016-03-07T22:14:08.848126808Z" level=debug msg="Registering POST, /containers/{name:.*}/unpause"
time="2016-03-07T22:14:08.848204817Z" level=debug msg="Registering POST, /containers/{name:.*}/restart"
time="2016-03-07T22:14:08.848278681Z" level=debug msg="Registering POST, /containers/{name:.*}/start"
time="2016-03-07T22:14:08.848348615Z" level=debug msg="Registering POST, /containers/{name:.*}/stop"
time="2016-03-07T22:14:08.848420618Z" level=debug msg="Registering POST, /containers/{name:.*}/wait"
time="2016-03-07T22:14:08.848491251Z" level=debug msg="Registering POST, /containers/{name:.*}/resize"
time="2016-03-07T22:14:08.848590568Z" level=debug msg="Registering POST, /containers/{name:.*}/attach"
time="2016-03-07T22:14:08.848669165Z" level=debug msg="Registering POST, /containers/{name:.*}/copy"
time="2016-03-07T22:14:08.848742896Z" level=debug msg="Registering POST, /containers/{name:.*}/exec"
time="2016-03-07T22:14:08.848819642Z" level=debug msg="Registering POST, /exec/{name:.*}/start"
time="2016-03-07T22:14:08.848889548Z" level=debug msg="Registering POST, /exec/{name:.*}/resize"
time="2016-03-07T22:14:08.848958077Z" level=debug msg="Registering POST, /containers/{name:.*}/rename"
time="2016-03-07T22:14:08.849037834Z" level=debug msg="Registering POST, /containers/{name:.*}/update"
time="2016-03-07T22:14:08.849109277Z" level=debug msg="Registering PUT, /containers/{name:.*}/archive"
time="2016-03-07T22:14:08.849190550Z" level=debug msg="Registering DELETE, /containers/{name:.*}"
time="2016-03-07T22:14:08.849216845Z" level=debug msg="Registering GET, /images/json"
time="2016-03-07T22:14:08.849318873Z" level=debug msg="Registering GET, /images/search"
time="2016-03-07T22:14:08.849373401Z" level=debug msg="Registering GET, /images/get"
time="2016-03-07T22:14:08.849428402Z" level=debug msg="Registering GET, /images/{name:.*}/get"
time="2016-03-07T22:14:08.849509958Z" level=debug msg="Registering GET, /images/{name:.*}/history"
time="2016-03-07T22:14:08.849580238Z" level=debug msg="Registering GET, /images/{name:.*}/json"
time="2016-03-07T22:14:08.849658289Z" level=debug msg="Registering POST, /commit"
time="2016-03-07T22:14:08.849710575Z" level=debug msg="Registering POST, /images/create"
time="2016-03-07T22:14:08.849765617Z" level=debug msg="Registering POST, /images/load"
time="2016-03-07T22:14:08.849832560Z" level=debug msg="Registering POST, /images/{name:.*}/push"
time="2016-03-07T22:14:08.849910171Z" level=debug msg="Registering POST, /images/{name:.*}/tag"
time="2016-03-07T22:14:08.849985573Z" level=debug msg="Registering DELETE, /images/{name:.*}"
time="2016-03-07T22:14:08.850055502Z" level=debug msg="Registering GET, /networks"
time="2016-03-07T22:14:08.850105467Z" level=debug msg="Registering GET, /networks/{id:.*}"
time="2016-03-07T22:14:08.850177977Z" level=debug msg="Registering POST, /networks/create"
time="2016-03-07T22:14:08.850235246Z" level=debug msg="Registering POST, /networks/{id:.*}/connect"
time="2016-03-07T22:14:08.850306649Z" level=debug msg="Registering POST, /networks/{id:.*}/disconnect"
time="2016-03-07T22:14:08.850389979Z" level=debug msg="Registering DELETE, /networks/{id:.*}"
time="2016-03-07T22:14:08.850473015Z" level=debug msg="Registering OPTIONS, /{anyroute:.*}"
time="2016-03-07T22:14:08.850537923Z" level=debug msg="Registering GET, /_ping"
time="2016-03-07T22:14:08.850603214Z" level=debug msg="Registering GET, /events"
time="2016-03-07T22:14:08.850654396Z" level=debug msg="Registering GET, /info"
time="2016-03-07T22:14:08.850697470Z" level=debug msg="Registering GET, /version"
time="2016-03-07T22:14:08.850746844Z" level=debug msg="Registering POST, /auth"
time="2016-03-07T22:14:08.850784258Z" level=debug msg="Registering GET, /volumes"
time="2016-03-07T22:14:08.850834588Z" level=debug msg="Registering GET, /volumes/{name:.*}"
time="2016-03-07T22:14:08.850936508Z" level=debug msg="Registering POST, /volumes/create"
time="2016-03-07T22:14:08.850995395Z" level=debug msg="Registering DELETE, /volumes/{name:.*}"
time="2016-03-07T22:14:08.851065688Z" level=debug msg="Registering POST, /build"
time="2016-03-07T22:14:08.851130299Z" level=info msg="API listen on [::]:2376"
time="2016-03-07T22:14:08.851169803Z" level=info msg="API listen on /var/run/docker.sock"
time="2016-03-07T22:14:09.137038800Z" level=debug msg="Calling GET /v1.15/info"
time="2016-03-07T22:14:09.137075352Z" level=debug msg="GET /v1.15/info"
time="2016-03-07T22:14:09.142123681Z" level=debug msg="Calling GET /v1.15/version"
time="2016-03-07T22:14:09.142158720Z" level=debug msg="GET /v1.15/version"
time="2016-03-07T22:14:09.144484526Z" level=debug msg="Calling GET /v1.15/containers/json"
time="2016-03-07T22:14:09.144504295Z" level=debug msg="GET /v1.15/containers/json?all=1&size=0"
time="2016-03-07T22:14:09.212279532Z" level=debug msg="Calling GET /v1.15/events"
time="2016-03-07T22:14:09.212316010Z" level=debug msg="GET /v1.15/events"
time="2016-03-07T22:14:09.222183110Z" level=debug msg="Calling GET /v1.15/containers/d5d7a3b2009769571f35029711c2564b7ee6231cbadfa858c9bad471a933f676/json"
time="2016-03-07T22:14:09.222216653Z" level=debug msg="GET /v1.15/containers/d5d7a3b2009769571f35029711c2564b7ee6231cbadfa858c9bad471a933f676/json"
time="2016-03-07T22:14:09.247701879Z" level=debug msg="Calling GET /v1.15/containers/21d865de28e79c10a80125d1fb13d72f3e6b3d44accf8264b3e285d3b5ddbe2d/json"
time="2016-03-07T22:14:09.247740095Z" level=debug msg="GET /v1.15/containers/21d865de28e79c10a80125d1fb13d72f3e6b3d44accf8264b3e285d3b5ddbe2d/json"
time="2016-03-07T22:14:09.271798719Z" level=debug msg="Calling GET /v1.15/images/json"
time="2016-03-07T22:14:09.271838761Z" level=debug msg="GET /v1.15/images/json?all=1"
time="2016-03-07T22:14:09.280243977Z" level=debug msg="Calling GET /v1.15/volumes"
time="2016-03-07T22:14:09.280284281Z" level=debug msg="GET /v1.15/volumes"
time="2016-03-07T22:14:09.295893747Z" level=debug msg="Calling GET /v1.15/networks"
time="2016-03-07T22:14:09.295919607Z" level=debug msg="GET /v1.15/networks"
^C
docker@node1:~$ exit
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine ssh node2
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
_ _ ____ _ _
| |__ ___ ___ | |_|___ \ __| | ___ ___| | _____ _ __
| '_ \ / _ \ / _ \| __| __) / _` |/ _ \ / __| |/ / _ \ '__|
| |_) | (_) | (_) | |_ / __/ (_| | (_) | (__| < __/ |
|_.__/ \___/ \___/ \__|_____\__,_|\___/ \___|_|\_\___|_|
Boot2Docker version 1.10.2, build master : 611be10 - Mon Feb 22 22:47:06 UTC 2016
Docker version 1.10.2, build c3959b1
# Run the engine-discovery command using the
# --update flag to force the update
docker@node2:~$ docker run --rm -it --name ucp \
> -v /var/run/docker.sock:/var/run/docker.sock \
> docker/ucp engine-discovery \
> --controller 192.168.99.100 \
> --host-address 192.168.99.102 --update
INFO[0000] This cluster does not have high availability because you only have a single controller.
INFO[0000] If you plan to add additional replica nodes for HA, you should do this before running this tool to reduce downtime.
WARN[0002] Configuration updated. You will have to manually restart the docker daemon for the changes to take effect.
# Restart docker. Since this is a boot2docker node,
# it's via init.d rather than the service command.
docker@node2:~$ sudo /etc/init.d/docker restart
Need TLS certs for node2,127.0.0.1,10.0.2.15,192.168.99.102
-------------------
# Check to see if docker is running.
# If this is the first or second nodes, the etcd cluster
# will complain because it hasn't achieved a quorum yet.
docker@node2:~$ sudo tail -f /var/log/docker.log
time="2016-03-07T22:15:19.579838639Z" level=debug msg="Registering DELETE, /volumes/{name:.*}"
time="2016-03-07T22:15:19.579943547Z" level=debug msg="Registering POST, /build"
time="2016-03-07T22:15:19.580001959Z" level=info msg="API listen on [::]:2376"
time="2016-03-07T22:15:19.580066049Z" level=info msg="API listen on /var/run/docker.sock"
time="2016-03-07T22:15:19.680998567Z" level=debug msg="2016/03/07 22:15:19 [DEBUG] serf: messageJoinType: node2\n"
time="2016-03-07T22:15:19.681292971Z" level=debug msg="2016/03/07 22:15:19 [DEBUG] serf: messageJoinType: node2\n"
time="2016-03-07T22:15:19.701548847Z" level=debug msg="2016/03/07 22:15:19 [DEBUG] serf: messageJoinType: node2\n"
time="2016-03-07T22:15:19.880935252Z" level=debug msg="2016/03/07 22:15:19 [DEBUG] serf: messageJoinType: node2\n"
time="2016-03-07T22:15:19.901325865Z" level=debug msg="2016/03/07 22:15:19 [DEBUG] serf: messageJoinType: node2\n"
time="2016-03-07T22:15:23.858113731Z" level=debug msg="Watch triggered with 3 nodes" discovery=etcd
time="2016-03-07T22:15:25.639472644Z" level=debug msg="Watch triggered with 3 nodes" discovery=etcd
^C
docker@node2:~$ exit
###########################
# CREATE OVERLAY NETWORK: #
###########################
[dimsenv] mboggess@dimsdev2:~ () $ docker-machine ssh node0
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
_ _ ____ _ _
| |__ ___ ___ | |_|___ \ __| | ___ ___| | _____ _ __
| '_ \ / _ \ / _ \| __| __) / _` |/ _ \ / __| |/ / _ \ '__|
| |_) | (_) | (_) | |_ / __/ (_| | (_) | (__| < __/ |
|_.__/ \___/ \___/ \__|_____\__,_|\___/ \___|_|\_\___|_|
Boot2Docker version 1.10.2, build master : 611be10 - Mon Feb 22 22:47:06 UTC 2016
Docker version 1.10.2, build c3959b1
docker@node0:~$ docker network create -d overlay --subnet=10.4.0.0/16 data.local
96f50ce413255df69e8dfe616190c90d3380d25204c16b27be0c66ebe04057cf
docker@node0:~$ docker network ls
NETWORK ID NAME DRIVER
96f50ce41325 data.local overlay
1faf51793e49 bridge bridge
b1b5091c0275 none null
4faefa7c2e28 host host
docker@node0:~$ exit
[dimsenv] mboggess@dimsdev2:~ () $ docker info
Containers: 7
Running: 7
Paused: 0
Stopped: 0
Images: 7
Server Version: 1.10.2
Storage Driver: aufs
Root Dir: /mnt/sda1/var/lib/docker/aufs
Backing Filesystem: extfs
Dirs: 59
Dirperm1 Supported: true
Execution Driver: native-0.2
Logging Driver: json-file
Plugins:
Volume: local
Network: host bridge overlay null
Kernel Version: 4.1.18-boot2docker
Operating System: Boot2Docker 1.10.2 (TCL 6.4.1); master : 611be10 - Mon Feb 22 22:47:06 UTC 2016
OSType: linux
Architecture: x86_64
CPUs: 1
Total Memory: 1.909 GiB
Name: node0
ID: AFDQ:Z3N3:OPVT:VTYE:CF5Y:FIZ6:7BIJ:6N6I:GXQ3:DFOP:QV6H:XQKM
Debug mode (server): true
File Descriptors: 70
Goroutines: 113
System Time: 2016-03-07T22:17:05.675047056Z
EventsListeners: 1
Init SHA1:
Init Path: /usr/local/bin/docker
Docker Root Dir: /mnt/sda1/var/lib/docker
Labels:
provider=virtualbox
Cluster store: etcd://192.168.99.100:12379
Cluster advertise: 192.168.99.100:12376
##########################
# RUN CONSUL CONTAINERS: #
##########################
# Remember to run the eval command for each node
# before running the Consul docker run command!
[dimsenv] mboggess@dimsdev2:~ () $ eval $(docker-machine env node0)
[dimsenv] mboggess@dimsdev2:~ () $ docker run -d --name=consul-node0 --net=data.local -v /mnt:/data -p 192.168.99.100:8300:8300 -p 192.168.99.100:8301:8301 -p 192.168.99.100:8301:8301/udp -p 192.168.99.100:8302:8302 -p 192.168.99.100:8302:8302/udp -p 192.168.99.100:8400:8400 -p 192.168.99.100:8500:8500 -p 192.168.99.100:8600:8600 -p 172.17.0.1:53:53/udp progrium/consul -node node0 -server -dc local -advertise 192.168.99.100 -bootstrap-expect 3
Unable to find image 'progrium/consul:latest' locally
latest: Pulling from progrium/consul
c862d82a67a2: Pull complete
0e7f3c08384e: Pull complete
0e221e32327a: Pull complete
09a952464e47: Pull complete
60a1b927414d: Pull complete
4c9f46b5ccce: Pull complete
417d86672aa4: Pull complete
b0d47ad24447: Pull complete
fd5300bd53f0: Pull complete
a3ed95caeb02: Pull complete
d023b445076e: Pull complete
ba8851f89e33: Pull complete
5d1cefca2a28: Pull complete
Digest: sha256:8cc8023462905929df9a79ff67ee435a36848ce7a10f18d6d0faba9306b97274
Status: Downloaded newer image for progrium/consul:latest
678e7c48ef46be766e198a414d901078fad1110cf688425703758ce53f1d5758
# EVAL!
[dimsenv] mboggess@dimsdev2:~ () $ eval $(docker-machine env node1)
[dimsenv] mboggess@dimsdev2:~ () $ docker run -d --name=consul-node1 --net=data.local -v /mnt:/data -p 192.168.99.101:8300:8300 -p 192.168.99.101:8301:8301 -p 192.168.99.101:8301:8301/udp -p 192.168.99.101:8302:8302 -p 192.168.99.101:8302:8302/udp -p 192.168.99.101:8400:8400 -p 192.168.99.101:8500:8500 -p 192.168.99.101:8600:8600 -p 172.17.0.1:53:53/udp progrium/consul -node node1 -server -dc local -advertise 192.168.99.101 -join 192.168.99.100
Unable to find image 'progrium/consul:latest' locally
latest: Pulling from progrium/consul
c862d82a67a2: Pull complete
0e7f3c08384e: Pull complete
0e221e32327a: Pull complete
09a952464e47: Pull complete
60a1b927414d: Pull complete
4c9f46b5ccce: Pull complete
417d86672aa4: Pull complete
b0d47ad24447: Pull complete
fd5300bd53f0: Pull complete
a3ed95caeb02: Pull complete
d023b445076e: Pull complete
ba8851f89e33: Pull complete
5d1cefca2a28: Pull complete
Digest: sha256:8cc8023462905929df9a79ff67ee435a36848ce7a10f18d6d0faba9306b97274
Status: Downloaded newer image for progrium/consul:latest
e3b0881350ca414ac9a652f8fd65f80714c108d316d00a3810162a2f0fc5491e
# EVAL!
[dimsenv] mboggess@dimsdev2:~ () $ eval $(docker-machine env node2)
[dimsenv] mboggess@dimsdev2:~ () $ docker run -d --name=consul-node2 --net=data.local -v /mnt:/data -p 192.168.99.102:8300:8300 -p 192.168.99.102:8301:8301 -p 192.168.99.102:8301:8301/udp -p 192.168.99.102:8302:8302 -p 192.168.99.102:8302:8302/udp -p 192.168.99.102:8400:8400 -p 192.168.99.102:8500:8500 -p 192.168.99.102:8600:8600 -p 172.17.0.1:53:53/udp progrium/consul -node node2 -server -dc local -advertise 192.168.99.102 -join 192.168.99.100
Unable to find image 'progrium/consul:latest' locally
latest: Pulling from progrium/consul
c862d82a67a2: Pull complete
0e7f3c08384e: Pull complete
0e221e32327a: Pull complete
09a952464e47: Pull complete
60a1b927414d: Pull complete
4c9f46b5ccce: Pull complete
417d86672aa4: Pull complete
b0d47ad24447: Pull complete
fd5300bd53f0: Pull complete
a3ed95caeb02: Pull complete
d023b445076e: Pull complete
ba8851f89e33: Pull complete
5d1cefca2a28: Pull complete
Digest: sha256:8cc8023462905929df9a79ff67ee435a36848ce7a10f18d6d0faba9306b97274
Status: Downloaded newer image for progrium/consul:latest
69f710905924070ae83f5833129cef38f7409b5ecabdc7335111fe5430571a45
Once you’ve completed the steps outlined, you should be able to go to https://<controller-ip>:443, log in with “admin” and the password you gave during the prompt, submit the license, and see the following:
14.2. Further Information¶
As more is learned about Docker Datacenter, particularly admin-related information, it will be documented here.